| HOME | CUSTOMER ZONE | PRODUCT CATALOGS  | SUPPORT | NEWSLETTERS | ABOUT US | CONTACT US |  |
| Product Videos |
| FAQs |
| menu 5.3.1 |
| menu 5.3.2 |
| menu 5.3.3 |
| menu 5.3.4 |
| menu 4.4.1 |
| menu 4.4.2 |
| menu 4.4.3 |
| menu 4.4.4 |
| Summer 2009 (PDF) |
| Spring 2009 (PDF) |
| Fall 2008 (PDF) |
| Spring 2008 (PDF) |
| 2008 Titrator Product Catalog (PDF) |
| HPLC Fitting Catalog (PDF) |
| Shiseido HPLC Column Catalog (PDF) |
| * ANALYZERS |
* KARL FISCHER TITRATORS |
| * KARL FISHER REAGENTS, DEHYDRATED SOLVENTS AND WATER STANDARDS |
| * POTENTIOMETRIC TITRATORS |
| * TITRATOR PARTS & ACCESSORIES |
| * HPLC PRODUCTS |
| REAGENTS |
| COM-300A |
| COM-1700 |
Volumetric  |
| Coulometric |
| Karl Fischer Evaporators |
| Automated Evaporators |
| Special Sampling Devices |
| Columns |
| Detectors & Degassers |
| Injectors |
| Accessories |
| AQV-300 |
| AQV-2200 |
| AQ-300 |
| AQ-2200 |
| AQS-2110 Solid Evaporator |
| AQS-2320 Solid Evaporator |
| AQL-2320 Oil Evaporator |
| EV-2000 Solid Evaporator |
| EV-2000L Oil Evaporator |
| menu 5.3.1 |
| menu 5.3.2 |
| menu 5.3.3 |
| menu 5.3.4 |
| menu 4.4.1 |
| menu 4.4.2 |
| menu 4.4.3 |
| menu 4.4.4 |
| HPLC Fittings |
| HPLC Solvent Reservoirs |
| SolventTrak Solvent Recycling System |
| Salt Analyzers |
| Mercury Analyzers |
| Karl Fischer Reagents |
| You are here: ALL CATEGORIES > ANALYZERS |
CLD-100 Salt Analyzer The new CLD-100 Salt Analyzer achieves speedy and accurate determination of chloride ions by coulometric titration method. Measurement occurs when silver ions produced from the silver wire by electrical oxidization in a special electrolyte react with chloride ions in the samples. The concentration of Cl or NaCl is calculated from the quantity of electricity required to produce silver ions. Easy maintenance means no standardization of reagent is required in coulometry. Operation is simple with an injection of the sample solution into the electrolyte-filled measuring vessel to obtain rapid and accurate results. Small footprint design (310mm W x 270mm D) saves bench space. Rapid measurement is achievable within 20 seconds to measure 20µL or 1% NaCl standard. Colored samples are also accurately measureable with no problem in potentiometric end-point detection method. Reusable electrolyte for several measurements achieves cost savings. The Mercury-free and trouble-free sleeve-type reference electrode is adopted for safety.
| HG-400 The HG The HG- -400/450 400/450 is a low cost mercury analyzer that has been especially designed for the environmental analyses in the budget-conscious small and medium size laboratory. This analyzer is based on cold vapor atomic absorption spectroscopy (CVAAS) using the principals of reduced vaporization. As such, it does not require any compressed gases and offers detection limits considerably below than 1ppt. The unit is a dedicated mercury analyzer and does not require any expensive additions or optional equipment. The dry air delivery system and the charcoal filter trap require very little maintenance �while providing detection limits down to 0.5ppt in a 5-mL sample.
|
| Shopping cart is empty. |
Featured Products
Product Specials
