| ITEM |
SPECIFICATIONS |
| Titration method |
Volumetric Karl Fischer reagent titration method |
| Titration control method |
Intermittent addition of titrant while approaching the end point. (1) Control using a waiting interval timer of 1 - 99sec (INTERVAL). Titration stops when there is no change in the electrode potential during this interval. (2) Control by titration timer. (T-TIMER: 1 - 99min.) |
| End point detection |
DC polarization potential difference detection |
| Buret capacity |
10mL Reproducibility ±0.01 mL (for full discharge, standard deviation for n=5) |
| Liquid contact material |
PTFE, ceramic and glass |
| Number of burets |
1 |
| Display screen |
2 lines, 16 digit LCD with backlighting |
| Display units |
mL (min. display is 0.001mL), mg H2O, %, or ppm |
| Measuring range |
100 ppm - 100%
|
| Minimum volume of titrant addition |
0.005mL or 0.01mL |
| Calculation function |
Concentration, factor standardization, statistics, recalculation |
| Titration cell capacity |
150mL |
| Minimum volume of solvent |
Approx. 30mL |
| External input/output |
Two RS-232C ports Port 1 (HOST) for PC connection. Port2 (BALANCE) for Balance connection. |
| Printers |
Optional thermal and impact printer - please inquire |
| Power supply / Power consumption |
AC100 - 240V, 50/60 Hz, 100 VA |
| Dimensions |
310 (W) x 270 (D) x 300 (H) mm |
| Weight |
Approx. 6kg |
| Safety approval |
CE approved |
